SAVE
UP TO 35% ON YOUR electric lighting expense with the Power-Save
HID Light Manager AND the Power-Save FLUORESCENT Light Manager
The Power-Save HID
Light Manager
The Power-Save HID Light Manager controls any
ballast-based, gaseous discharge lighting system. This includes
Mercury Vapor, Metal Halide, High and Low Pressure Sodium. Its
flexible design allows The Power-Save HID Light Manager to interface
with any dedicated lighting circuit of 480 volts in capacities
of 10 to 100 amperes three phase. One unit can reduce
the energy consumption of one, ten, 100 or even 400 lighting
fixtures and the savings can be measured within 20 minutes after
the lights turn on!
The Power-Save HID Light Manager works in conjunction
with other energy savings devices such as high efficiency lamps,
photoelectric switches, and other energy management systems.
Down-line switching capability is also an available option. Additionally, running
the lamps at a lower wattage will reduce the operating temperature,
this prolonging the life of the lamps and the ballasts by up
to 40%. The Power-Save HID Light Manager controls
spikes, controls and regulates line voltage to induce savings
and also prevents over-voltage situations, which are
a major cause of premature lighting system failure.
We offer 4 sizes and custom sizes as
well:
10kva 3-phase 480 volt
15kva 3-phase 480 volt
25kva 3-phase 480 volt
50kva 3-phase 480 volt
Benefits
| • Most Importantly,
immediate reduction of electricity costs |
| • Automatic By-pass built in |
| • Existing ballast, fixtures
or lamps do not require replacement |
| • Power-Save HID Light Manager
is compact requiring limited space |
| • Installation is quick, easy
and requires minimal adoption to existing equipment |
| • Environmentally friendly, reduced
consumption of electricity equals reduced greenhouse gases
generated |
| • Cost effective solution |
| • Investment return in approximately
12 to 30 months |
| • Reduce real demand and penalty
charges |
| • Peak load incentives (contact
your local utility for details and availability) |
| • Power-Save HID Light Manager
unit has a display inside the controller casing |
| • LED display for time (am/pm),
date month, hour, energy saving levels and up to 16 stage
display for logic controller |
Power-Save HID Light Manager
can be used in the following applications:
Street lighting, highways, bridges, tunnels,
parking areas, indoor and outdoor garages,
industrial buildings, plants, warehouses, factories, large showrooms,
hospitals, care facilities, correctional facilities, museums,
shopping malls, large retail stores, casinos, gas stations, schools,
university, colleges, educational facilities, government buildings,
condominiums, rental properties, high-rise buildings, sport facilities,
ice rinks, soccer fields, baseball diamonds and all indoor sporting
facilities (pools, tennis, fitness club etc.).
The Power-Save Fluorescent Light Manager
As the world phases out incandescent lights,
new more efficient light sources are gaining popularity, and
as such, the need for controlling these devices is becoming increasingly
critical. For the past decade, dimming fluorescent light sources
has been a challenging task because the ideal device would control
the light level to provide comfort for residential and office
environments, while at the same time, enabling energy savings
especially in commercial installations.
A number of manufacturers offer solutions to
this problem; however, all have common deficiencies: high initial
costs, extensive changes in existing installations, or the inability
to control all the various types of light sources.
Power-Save offers a solution to these
problems using patented technology for controlling all Compact
Fluorescent Lights (non-dimmable and dimmable) and Fluorescent
Linear Tubes (T12, T8, T5, circular) with non-dimmable ballasts. The
device has also proven suitable for controlling neon, cold
cathode, halogen, and incandescent lights. Because of it unique
ability to control such various sources, it is also currently
under test for other control functions such as improved fan
speed control.
This Universal Control Device (UCD) represents
a true breakthrough in technology. Installation is made
simple since it is a direct replacement of the existing wall
switch. Also initial adjustment for size of the light
load and dimming can be preset to the customer’s preference.
The first model has been designed UCD-01 for
a single phase 120V / 60Hz, 300W load. The unit meets safety
standards for Solid-State Dimming Controls, ANSI/UL 1472 First
Edition, and CSA-C22.2 No. 184-96.
Additional features of future models will be
improved controls including light harvesting remote control,
motion and/or infrared sensors, and touch screen displays.
Product Description: 300W-120VAC Universal Control Device dimmer
for single pole applications with all Compact Fluorescent Lights
(non-dimmable and dimmable), Fluorescent Linear Tubes with standard
electric and magnetic ballasts, Cold Cathode Lamps, Halogen, and
Incandescent lights.
Product Features:
Model Name: UCD -01
Switch Type: Single Pole
Type: Digital
Load Type: Resistive, Inductive, Capacitive
Load Rating: 300W / 150W CFL *not to exceed 200W CFL
Voltage: 120V AC 60 Hz
Warranty: 1 year limited
Standards and Certifications: ETL/CSA
GFI Compatible
Color: White
United States Patent 7164238
|
